Great news! But do you really have to send all three commands? What happens if you send only the last one (with "06 1b" in it) ?? Yes, exactly! I have tried all combinations. At least, I need use three commands to switch mode. Anyway, thanks a lot. I found ttyUSB and connect to pppd succe...

Yes, I didn't add "Need response" flag. Finally,I found something I did switch mode successfully by followin 3 commands (Message Content): 00000000: 55 53 42 43 00 3e c8 88 00 00 00 00 00 00 06 1e 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000000: 55 53 42 43 08 70 e9 87 00 0...

You mentioned a sniffing log from Windows. Can you post that on "pastebin.com" and give us the link? Sure, I sent the total USBSniff log on http://pastebin.com/m14d7f50f I collect every messeage sent to [endpoint 0x00000001] which like switch command as below: http://pastebin.com/m6c1b49a...

Ok, now, I check in listusb: Bus 003 Device 003: ID 1a8d:1000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1a8d idProduct 0x1000 bcdDevice 0.00 iManufacturer 2 BandRich, Inc. ...

# lsusb -v -d 1a8d: Then do it again to see "error -145". ok, "error -145" is what I saw in usb_modeswitch v.0.9.4. Now, I changed to 1.0.6 My steps as following: [admin@asus usb_modeswitch-1.0.6]$ lsusb -v -d 1a8d:1000 Bus 003 Device 003: ID 1a8d:1000 Device Descriptor: bLength...

Again, be so kind and post the information I requested. Ok, here you are: [admin@asus usb_modeswitch-1.0.6]$lsusb | grep 1a8d Bus 003 Device 003: ID 1a8d:1000 [admin@asus usb_modeswitch-1.0.6]$./usb_modeswitch -v 0x1a8d -p 0x1000 Looking for default devices ... Found default devices (1) Accessing d...

Hi, Josh, It is not easy to switch via a singal command. Last time, I used usb_modeswitch 0.94. Now, I update to v1.06. My "dmesg" is: ------------------------------ scsi1: SCSI emulation for USB Mass Storage devices Vender BandRich Model: CDROM Rev: 2.01 Type: CD-ROM ANSI SCSI revision: 0...

Is there any body work on BandLuxe C170 USB and successfully setup in USB_ModeSwitch? As I can find in forum, only C120. And it seems not only one command to switch. it needs 6 commands a least. What I met the problem is, After I sent one command to C170 USB and USB_ModeSwitch report it has been det...