Search found 1397 matches

by LOM
19 Jul 2021, 10:15
Forum: Device Information
Topic: Setting up a 05c6:6000 Qualcomm, Inc. Siemens SG75 Help please!
Replies: 31
Views: 9182

Re: Setting up a 05c6:6000 Qualcomm, Inc. Siemens SG75 Help please!

For some reason the modem device keeps "rebooting" now - if i set disableswitching=1 the devices stays as 05c6:f000 And everytime i run "sudo usb_modeswitch -W -v 05c6 -p f000 -K" the dongle reboots. What am i doing wrong? Automatic invoke of usb_modeswitch is disabled, the cmd ...
by LOM
14 Jul 2021, 02:57
Forum: Device Information
Topic: Setting up a 05c6:6000 Qualcomm, Inc. Siemens SG75 Help please!
Replies: 31
Views: 9182

Re: Setting up a 05c6:6000 Qualcomm, Inc. Siemens SG75 Help please!

devdevdev wrote: 13 Jul 2021, 12:31
Error: can't use storage command in MessageContent with interface 0; interface class is 255, expected 8. Abort
This tells us that the dongle is not in initial mode, it has already been switched and is ready to be used.
by LOM
14 Jul 2021, 02:54
Forum: Device Information
Topic: 12d1:15c1 Huawei Technologies Co., Ltd. ME906s LTE M.2 Module
Replies: 9
Views: 1869

Re: 12d1:15c1 Huawei Technologies Co., Ltd. ME906s LTE M.2 Module

Hi LOM, Having just tested config 2 (I'm in a spot with limited mobile coverage this weekend),it seem that it will work for me in either config 2 or config 3, although I am not sure why, given what you say about switching to config 0, then config 3. You probably have an improved firmware in your ca...
by LOM
09 Jul 2021, 09:16
Forum: Device Information
Topic: 12d1:15c1 Huawei Technologies Co., Ltd. ME906s LTE M.2 Module
Replies: 9
Views: 1869

Re: 12d1:15c1 Huawei Technologies Co., Ltd. ME906s LTE M.2 Module

Config 2 is what the usb core should select as the default config so this is correct. usb_modeswitch will switch it to the mbim config which is the favored linux config, it will do that if the system contains mbim drivers in expected place(s) and it does so by first selecting config 0, then sleeping...
by LOM
09 Jul 2021, 04:47
Forum: Device Information
Topic: 12d1:15c1 Huawei Technologies Co., Ltd. ME906s LTE M.2 Module
Replies: 9
Views: 1869

Re: 12d1:15c1 Huawei Technologies Co., Ltd. ME906s LTE M.2 Module

What happens if you disable usb_modeswitch in /etc/usb_modeswitch.conf and then re-plug the card?
Is it still unconfigured?
by LOM
08 Jul 2021, 19:26
Forum: Device Information
Topic: 12d1:15c1 Huawei Technologies Co., Ltd. ME906s LTE M.2 Module
Replies: 9
Views: 1869

Re: 12d1:15c1 Huawei Technologies Co., Ltd. ME906s LTE M.2 Module

Which linux distro are you using and what is its kernel version?
The linux usb core should set a default configuration, this is the first time for me to see a device being left unconfigured by the linux kernel.
Something is wrong there.
by LOM
06 Jul 2021, 10:09
Forum: Setup Discussion
Topic: Huawei e8372h-320 switches to 0x14db and immediately switches back to 0x1f01 ???
Replies: 8
Views: 2663

Re: Huawei e8372h-320 switches to 0x14db and immediately switches back to 0x1f01 ???

Seems to be a common occurrence, reported both for pfSense and plain BSD. https://forum.netgate.com/topic/156221/sg-1100-lte-usb-modem google cdce0: detached and you will find lots of such reports but no solution. :x It is reported mostly for Huawei E3372 (E8372 without wifi) but also for some ether...
by LOM
05 Jul 2021, 12:24
Forum: Setup Discussion
Topic: Huawei e8372h-320 switches to 0x14db and immediately switches back to 0x1f01 ???
Replies: 8
Views: 2663

Re: Huawei e8372h-320 switches to 0x14db and immediately switches back to 0x1f01 ???

Not enough power on the usb port is the most common reason for why mobile broadband dongles fall off the usb bus when they draw more current than the port can deliver.The overcurrent makes the voltage drop so low that the dongle gets starved and resets itself. Another thing to look for is the ip add...
by LOM
05 Jul 2021, 10:14
Forum: Setup Discussion
Topic: Huawei e8372h-320 switches to 0x14db and immediately switches back to 0x1f01 ???
Replies: 8
Views: 2663

Re: Huawei e8372h-320 switches to 0x14db and immediately switches back to 0x1f01 ???

The device is verified working on two Win10 PCs and a Mac. Also, I know 0x155e isn't a valid mode for this device (and I don't want PPP anyway), but for a test I modified the config file to HuaweiAltMode=1 and the device does successfully switch to 0x155e, and it stays that way, even after reboot, ...
by LOM
01 Jul 2021, 02:36
Forum: Device Information
Topic: Vodafone K5161h (12d1:1591)
Replies: 3
Views: 3303

Re: Vodafone K5161h (12d1:1591)

This may not be the best place to ask but does anyone know if it's possible to disable the CD mode in the modem permanently? I'd like to use this in my router (Billion) but the dongle seems to remain in CD mode when connected. I did see some old comments for serial modems about AT commands to chang...
by LOM
25 Jun 2021, 03:22
Forum: Device Information
Topic: E3372h-320 (update 2020 version of E3372) automatically switches itself into ethernet mode
Replies: 19
Views: 9555

Re: E3372h-320 (update 2020 version of E3372) automatically switches itself into ethernet mode

Hi, thanks for insights. I can to put E3372h-320 in serial mode (/dev/ttyUSB0,1,2) on OpenWRT 21.02rc3 snip Double NAT never more! It is rare to get a public IP address from a mobile internet provider and that is equally true for a dialup connection. Check what IP address you get, I think you are s...
by LOM
13 Jun 2021, 04:20
Forum: Device Information
Topic: TP-Link MA180
Replies: 18
Views: 28640

Re: TP-Link MA180

Are available other options to retrieve sms using other ttys ports instead tty2? Probably not since the other tty ports are for diag and NMEA and most likely don't speak any AT or a very limited AT subset. Use the dongle in direct net mode through the qmi_wwan interface so that you can be remotely ...
by LOM
01 Jun 2021, 15:40
Forum: Everything Coding
Topic: Add support for Logitech G920 Racing Wheel
Replies: 13
Views: 20816

Re: Add support for Logitech G920 Racing Wheel

juankax wrote: 01 Jun 2021, 14:30
I have the same problem but the link doesn't work.
Nothing wrong with the link in Josh post above yours, it works for me.
by LOM
22 May 2021, 10:21
Forum: The PPP Widget Family for Android
Topic: pppwidget with internal modem
Replies: 6
Views: 1944

Re: pppwidget with internal modem

Ok, i can confirm that the system asked mit to give access to USB. My system partition is read only, i this a problem? I don't know, that is a question Josh has to answer. I have a feeling though that read-only is not kosher, I think pppwidget has to create a WAN device among other things and that ...
by LOM
22 May 2021, 03:03
Forum: The PPP Widget Family for Android
Topic: pppwidget with internal modem
Replies: 6
Views: 1944

Re: pppwidget with internal modem

But there is no app in BlissOS or Android X86. It a new installation and i can't use the internal USB modem, there is no way to connect and no connection symbol is shown, only a WLAN symbol :o :) :) Neither BlissOS nor Android X86 are official Android versions and I have no idea of how they handle ...