| |
Activation Codes and Methods, Hardware Details, Sniffing
-
PeterC
- Posts: 8
- Joined: 08 Jun 2009, 18:15
- Location: Sweden
Post
by PeterC » 19 Apr 2010, 23:37
Hello again!
Had it working for more than six months and suddenly after updating the Ubuntu 9.04 it stopped working.
I no longer see any /dev/ttyACM0 or /dev/ttyACM1.
After trying to get it working under 9.04 I decided to upgrade to Ubuntu 9.10 and also installed the latest (1.1.2) version of USB_Modeswitch.
What I see from the logfile is:
Code: Select all USB_ModeSwitch log from Mon Apr 19 23:01:04 CEST 2010
Using global config file: /etc/usb_modeswitch.conf
raw args from udev: /1-1:1.0
Bus ID for device not given by udev.
Trying to determine it from kernel name (1-1:1.0) ...
USB dir exists: /sys/bus/usb/devices/1-1
----------------
USB values from sysfs:
manufacturer Sony Ericsson
product MMC Flash Card
serial 3578650206310600
----------------
SCSI attributes not needed, moving on
checking config: /etc/usb_modeswitch.d/0fce:d0e1
! matched, now switching
(running command: /usr/sbin/usb_modeswitch -I -W -c /etc/usb_modeswitch.d/0fce:d0e1)
verbose output of usb_modeswitch:
--------------------------------
usb_set_debug: Setting debugging level to 15 (on)
usb_os_find_busses: Found 001
usb_os_find_devices: Found 002 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
USB error: could not get bound driver: No data available
Reading config file: /etc/usb_modeswitch.d/0fce:d0e1
* usb-modeswitch: handle USB devices with multiple modes
* Version 1.1.2alpha (C) Josua Dietze 2010
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x0fce
DefaultProduct= 0xd0e1
TargetVendor= not set
TargetProduct= not set
TargetClass= 0x02
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=1
GCTMode=0
MessageEndpoint= not set
MessageContent= not set
NeedResponse=0
ResponseEndpoint= not set
Interface=0x00
Configuration=0x02
InquireDevice disabled
Success check enabled, max. wait time 20 seconds
System integration mode enabled
Looking for target devices ...
searching devices, found USB ID 0fce:d0e1
found matching vendor ID
found matching product ID
target class 02 not matching
searching devices, found USB ID 1d6b:0001
No devices in target mode or class found
Looking for default devices ...
searching devices, found USB ID 0fce:d0e1
found matching vendor ID
found matching product ID
target class 02 not matching
adding device as default
searching devices, found USB ID 1d6b:0001
Found devices in default mode or class (1)
Accessing device 002 on bus 001 ...
USB description data (for identification)
-------------------------
Manufacturer: Sony Ericsson
Product: MMC Flash Card
Serial No.: 3578650206310600
-------------------------
Note: ignoring CheckSuccess. Separate checks for Sony mode
Looking for active driver ...
No driver found. Either detached before or never attached
Trying to send Sony control message
OK, control message sent, waiting for device to return ...
######usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 1d6b:0001
#usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 1d6b:0001
#usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 1d6b:0001
#usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 1d6b:0001
#usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 1d6b:0001
#usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 1d6b:0001
#usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 1d6b:0001
#usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 1d6b:0001
#usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 1d6b:0001
#usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 1d6b:0001
#usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 1d6b:0001
#usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 1d6b:0001
#usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 1d6b:0001
#usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 1d6b:0001
#usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 1d6b:0001
#usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 1d6b:0001
#usb_os_find_busses: Found 001
usb_os_find_devices: Found 003 on 001
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
searching devices, found USB ID 0fce:d0e1
found matching vendor ID
found matching product ID
target class 02 matching
adding device
searching devices, found USB ID 1d6b:0001
After 22 seconds: device came back, proceeding
Sending Sony control message again ...
OK, control message sent
Changing configuration to 2 ...
OK, configuration set
ok:
-> device should be stable now. Bye.
--------------------------------
(end of usb_modeswitch output)
Checking for AVOID_RESET_QUIRK attribute
AVOID_RESET_QUIRK not present
All done, exiting
As far as I can tell, everything looks OK.
Any help would be appreciated!
Best regards,
Peter Carlsson[/code]
-
Josh
- Site Admin
- Posts: 6570
- Joined: 03 Nov 2007, 00:30
Post
by Josh » 20 Apr 2010, 00:05
Hmm, switching went fine obviously. Have you got the "cdc_acm" module ? And what does "dmesg" say after switching ?
-
PeterC
- Posts: 8
- Joined: 08 Jun 2009, 18:15
- Location: Sweden
Post
by PeterC » 20 Apr 2010, 07:33
Josh wrote:Hmm, switching went fine obviously. Have you got the "cdc_acm" module ? And what does "dmesg" say after switching ?
I didn't have the cdc_acm so I added 'cdc-acm' to /etc/modules. After that I tried manually to switch the MD400 with:
Code: Select all ./usb_modeswitch -O -W -v 0x0fce -p 0xd0e1
And here is what is in /var/log/syslog:
Code: Select all Apr 20 07:23:55 peter-brastad kernel: [ 492.868061] usb 1-1: new full speed USB device using uhci_hcd and address 3
Apr 20 07:23:55 peter-brastad kernel: [ 493.042601] usb 1-1: configuration #2 chosen from 1 choice
Apr 20 07:23:55 peter-brastad kernel: [ 493.055619] usb-storage: device ignored
Apr 20 07:23:55 peter-brastad kernel: [ 493.070250] usb-storage: device ignored
Apr 20 07:23:55 peter-brastad kernel: [ 493.076588] cdc_acm 1-1:2.1: ttyACM0: USB ACM device
Apr 20 07:23:55 peter-brastad kernel: [ 493.094416] usb-storage: device ignored
Apr 20 07:23:55 peter-brastad kernel: [ 493.099381] cdc_acm 1-1:2.3: ttyACM1: USB ACM device
Apr 20 07:23:55 peter-brastad kernel: [ 493.110148] usb-storage: device ignored
Apr 20 07:23:55 peter-brastad kernel: [ 493.115331] usb-storage: device ignored
Apr 20 07:23:55 peter-brastad kernel: [ 493.135186] usb-storage: device ignored
Apr 20 07:23:55 peter-brastad kernel: [ 493.155923] usb-storage: device ignored
Apr 20 07:23:55 peter-brastad kernel: [ 493.171247] usb-storage: device ignored
Apr 20 07:23:55 peter-brastad kernel: [ 493.175392] cdc_wdm 1-1:2.5: cdc-wdm0: USB WDM device
Apr 20 07:23:55 peter-brastad kernel: [ 493.175522] cdc_wdm 1-1:2.6: cdc-wdm1: USB WDM device
Apr 20 07:23:55 peter-brastad kernel: [ 493.175587] usbcore: registered new interface driver cdc_wdm
Apr 20 07:23:55 peter-brastad modem-manager: (ttyACM0) opening serial device...
Apr 20 07:23:55 peter-brastad kernel: [ 493.304486] usbcore: registered new interface driver cdc_ether
Apr 20 07:23:55 peter-brastad kernel: [ 493.327290] usb 1-1: unsupported MDLM descriptors
Apr 20 07:23:55 peter-brastad kernel: [ 493.327379] usbcore: registered new interface driver zaurus
Apr 20 07:23:55 peter-brastad modem-manager: (ttyACM0): probe requested by plugin 'Generic'
Apr 20 07:23:55 peter-brastad modem-manager: (ttyACM1) opening serial device...
Apr 20 07:23:55 peter-brastad modem-manager: (ttyACM1): probe requested by plugin 'Generic'
Apr 20 07:23:57 peter-brastad modem-manager: (ttyACM1) closing serial device...
Apr 20 07:23:57 peter-brastad modem-manager: (Generic): GSM modem /sys/devices/pci0000:00/0000:00:1f.4/usb1/1-1 claimed port ttyACM1
Apr 20 07:23:57 peter-brastad modem-manager: Added modem /sys/devices/pci0000:00/0000:00:1f.4/usb1/1-1
Apr 20 07:23:57 peter-brastad modem-manager: Exported modem /sys/devices/pci0000:00/0000:00:1f.4/usb1/1-1 as /org/freedesktop/ModemManager/Modems/0
Apr 20 07:23:57 peter-brastad NetworkManager: <info> (ttyACM1): new GSM device (driver: 'cdc_acm')
Apr 20 07:23:57 peter-brastad NetworkManager: <info> (ttyACM1): exported as /org/freedesktop/NetworkManager/Devices/1
Apr 20 07:23:57 peter-brastad NetworkManager: <info> (ttyACM1): now managed
Apr 20 07:23:57 peter-brastad NetworkManager: <info> (ttyACM1): device state change: 1 -> 2 (reason 2)
Apr 20 07:23:57 peter-brastad NetworkManager: <info> (ttyACM1): deactivating device (reason: 2).
Apr 20 07:23:57 peter-brastad NetworkManager: flush_routes: assertion `iface_idx >= 0' failed
Apr 20 07:23:57 peter-brastad NetworkManager: flush_addresses: assertion `iface_idx >= 0' failed
Apr 20 07:23:57 peter-brastad NetworkManager: <info> (ttyACM1): device state change: 2 -> 3 (reason 0)
Apr 20 07:23:57 peter-brastad NetworkManager: <info> Activation (ttyACM1) starting connection 'Mobila bredbandet'
Apr 20 07:23:57 peter-brastad NetworkManager: <info> (ttyACM1): device state change: 3 -> 4 (reason 0)
Apr 20 07:23:57 peter-brastad NetworkManager: <info> Activation (ttyACM1) Stage 1 of 5 (Device Prepare) scheduled...
Apr 20 07:23:57 peter-brastad NetworkManager: <info> Activation (ttyACM1) Stage 1 of 5 (Device Prepare) started...
Apr 20 07:23:57 peter-brastad NetworkManager: <info> Activation (ttyACM1) Stage 1 of 5 (Device Prepare) complete.
Apr 20 07:23:57 peter-brastad modem-manager: (ttyACM1) opening serial device...
Apr 20 07:23:57 peter-brastad modem-manager: Got failure code 100: Unknown error
Apr 20 07:23:57 peter-brastad NetworkManager: <WARN> stage1_prepare_done(): GSM modem connection failed: Unknown error
Apr 20 07:23:57 peter-brastad NetworkManager: <info> (ttyACM1): device state change: 4 -> 9 (reason 1)
Apr 20 07:23:57 peter-brastad NetworkManager: <info> Marking connection 'Mobila bredbandet' invalid.
Apr 20 07:23:57 peter-brastad NetworkManager: <info> Activation (ttyACM1) failed.
Apr 20 07:23:57 peter-brastad NetworkManager: <info> (ttyACM1): device state change: 9 -> 3 (reason 0)
Apr 20 07:23:57 peter-brastad NetworkManager: <info> (ttyACM1): deactivating device (reason: 0).
Apr 20 07:23:57 peter-brastad NetworkManager: flush_routes: assertion `iface_idx >= 0' failed
Apr 20 07:23:57 peter-brastad NetworkManager: flush_addresses: assertion `iface_idx >= 0' failed
Apr 20 07:23:57 peter-brastad modem-manager: (ttyACM1) closing serial device...
Apr 20 07:23:57 peter-brastad NetworkManager: <info> Policy set 'Auto eth0' (eth0) as default for routing and DNS.
Apr 20 07:24:00 peter-brastad modem-manager: (ttyACM0) closing serial device...
Apr 20 07:24:00 peter-brastad modem-manager: (Generic): GSM modem /sys/devices/pci0000:00/0000:00:1f.4/usb1/1-1 claimed port ttyACM0
Right now I have to stay connected with cable, but tonight I will try connecting with the MD400.
Best regards,
Peter Carlsson
-
PeterC
- Posts: 8
- Joined: 08 Jun 2009, 18:15
- Location: Sweden
Post
by PeterC » 20 Apr 2010, 22:29
Sad to say that I still have trouble connecting.
Found out I missed the usbserial module also and I added that to /etc/modules.
After that I tried manually to switch the MD400 with:
Code: Select all ./usb_modeswitch -O -W -v 0x0fce -p 0xd0e1
And here is what is in /var/log/syslog:
Code: Select all Apr 20 22:21:16 peter-brastad kernel: [ 515.264127] usb 1-1: USB disconnect, address 2
Apr 20 22:21:36 peter-brastad kernel: [ 534.948054] usb 1-1: new full speed USB device using uhci_hcd and address 3
Apr 20 22:21:36 peter-brastad kernel: [ 535.121412] usb 1-1: configuration #2 chosen from 1 choice
Apr 20 22:21:36 peter-brastad kernel: [ 535.134423] usb-storage: device ignored
Apr 20 22:21:36 peter-brastad kernel: [ 535.139462] usb-storage: device ignored
Apr 20 22:21:36 peter-brastad kernel: [ 535.143970] cdc_acm 1-1:2.1: ttyACM0: USB ACM device
Apr 20 22:21:36 peter-brastad kernel: [ 535.158318] usb-storage: device ignored
Apr 20 22:21:36 peter-brastad kernel: [ 535.170165] cdc_acm 1-1:2.3: ttyACM1: USB ACM device
Apr 20 22:21:36 peter-brastad kernel: [ 535.186608] usb-storage: device ignored
Apr 20 22:21:36 peter-brastad kernel: [ 535.199452] usb-storage: device ignored
Apr 20 22:21:36 peter-brastad kernel: [ 535.244352] usb-storage: device ignored
Apr 20 22:21:36 peter-brastad kernel: [ 535.252360] usb-storage: device ignored
Apr 20 22:21:36 peter-brastad kernel: [ 535.276334] usb-storage: device ignored
Apr 20 22:21:36 peter-brastad kernel: [ 535.279782] cdc_wdm 1-1:2.5: cdc-wdm0: USB WDM device
Apr 20 22:21:36 peter-brastad kernel: [ 535.279953] cdc_wdm 1-1:2.6: cdc-wdm1: USB WDM device
Apr 20 22:21:36 peter-brastad kernel: [ 535.280059] usbcore: registered new interface driver cdc_wdm
Apr 20 22:21:36 peter-brastad modem-manager: (ttyACM0) opening serial device...
Apr 20 22:21:36 peter-brastad modem-manager: (ttyACM0): probe requested by plugin 'Generic'
Apr 20 22:21:36 peter-brastad modem-manager: (ttyACM1) opening serial device...
Apr 20 22:21:36 peter-brastad modem-manager: (ttyACM1): probe requested by plugin 'Generic'
Apr 20 22:21:38 peter-brastad modem-manager: (ttyACM0) closing serial device...
Apr 20 22:21:38 peter-brastad modem-manager: (Generic): GSM modem /sys/devices/pci0000:00/0000:00:1f.4/usb1/1-1 claimed port ttyACM0
Apr 20 22:21:38 peter-brastad modem-manager: Added modem /sys/devices/pci0000:00/0000:00:1f.4/usb1/1-1
Apr 20 22:21:38 peter-brastad modem-manager: Exported modem /sys/devices/pci0000:00/0000:00:1f.4/usb1/1-1 as /org/freedesktop/ModemManager/Modems/0
Apr 20 22:21:38 peter-brastad modem-manager: (ttyACM1) closing serial device...
Apr 20 22:21:38 peter-brastad modem-manager: (Generic): GSM modem /sys/devices/pci0000:00/0000:00:1f.4/usb1/1-1 claimed port ttyACM1
Apr 20 22:21:38 peter-brastad NetworkManager: <info> (ttyACM0): new GSM device (driver: 'cdc_acm')
Apr 20 22:21:38 peter-brastad NetworkManager: <info> (ttyACM0): exported as /org/freedesktop/NetworkManager/Devices/1
Apr 20 22:21:38 peter-brastad NetworkManager: <info> (ttyACM0): now managed
Apr 20 22:21:38 peter-brastad NetworkManager: <info> (ttyACM0): device state change: 1 -> 2 (reason 2)
Apr 20 22:21:38 peter-brastad NetworkManager: <info> (ttyACM0): deactivating device (reason: 2).
Apr 20 22:21:38 peter-brastad NetworkManager: flush_routes: assertion `iface_idx >= 0' failed
Apr 20 22:21:38 peter-brastad NetworkManager: flush_addresses: assertion `iface_idx >= 0' failed
Apr 20 22:21:38 peter-brastad NetworkManager: <info> (ttyACM0): device state change: 2 -> 3 (reason 0)
Apr 20 22:21:38 peter-brastad NetworkManager: <info> Activation (ttyACM0) starting connection 'Telenor Mobilt bredband 1'
Apr 20 22:21:38 peter-brastad NetworkManager: <info> (ttyACM0): device state change: 3 -> 4 (reason 0)
Apr 20 22:21:38 peter-brastad NetworkManager: <info> Activation (ttyACM0) Stage 1 of 5 (Device Prepare) scheduled...
Apr 20 22:21:38 peter-brastad NetworkManager: <info> Activation (ttyACM0) Stage 1 of 5 (Device Prepare) started...
Apr 20 22:21:38 peter-brastad NetworkManager: <info> Activation (ttyACM0) Stage 1 of 5 (Device Prepare) complete.
Apr 20 22:21:38 peter-brastad modem-manager: (ttyACM0) opening serial device...
Apr 20 22:21:38 peter-brastad modem-manager: Got failure code 100: Unknown error
Apr 20 22:21:38 peter-brastad NetworkManager: <WARN> stage1_prepare_done(): GSM modem connection failed: Unknown error
Apr 20 22:21:38 peter-brastad NetworkManager: <info> (ttyACM0): device state change: 4 -> 9 (reason 1)
Apr 20 22:21:38 peter-brastad NetworkManager: <info> Marking connection 'Telenor Mobilt bredband 1' invalid.
Apr 20 22:21:38 peter-brastad NetworkManager: <info> Activation (ttyACM0) failed.
Apr 20 22:21:38 peter-brastad NetworkManager: <info> (ttyACM0): device state change: 9 -> 3 (reason 0)
Apr 20 22:21:38 peter-brastad NetworkManager: <info> (ttyACM0): deactivating device (reason: 0).
Apr 20 22:21:38 peter-brastad NetworkManager: flush_routes: assertion `iface_idx >= 0' failed
Apr 20 22:21:38 peter-brastad NetworkManager: flush_addresses: assertion `iface_idx >= 0' failed
Apr 20 22:21:38 peter-brastad modem-manager: (ttyACM0) closing serial device...
When trying to configure NetworkManager it only see ttyACM0. When I had it working it was using ttyACM1.
I have also tried with wvdial with no success.
However, it looks like USB_Modeswitch does what it is supposed to do.
Any suggestions?
Best regards,
Peter Carlsson
-
Josh
- Site Admin
- Posts: 6570
- Joined: 03 Nov 2007, 00:30
Post
by Josh » 20 Apr 2010, 23:42
This NetworkManager is causing a lot of trouble with all that probing of ports and whatnot. I'd rather recommend to use wvdial or UMTSmon.
I myself use pppd directly with an old fashioned chat script for dialing ...
-
Oystein
- Posts: 2
- Joined: 06 Jun 2010, 17:05
Post
by Oystein » 14 Jun 2010, 20:01
I'm trying to get my MD400 working (Telenor, Norway), and running into problems when I try using usb_modeswitch.
I've install version 1.1.0 (C) on Ubuntu netbook remix 10.4.
TRying to run it I get segmentation faults.
Output from running with the -W switch:
Code: Select all lance@luthien:~$ sudo usb_modeswitch -W -v 0x0fce -p 0xd0e1 -O 1
Taking all parameters from the command line
* usb-modeswitch: handle USB devices with multiple modes
* Version 1.1.0 (C) Josua Dietze 2010
* Based on libusb 0.1.12
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x0fce
DefaultProduct= 0xd0e1
TargetVendor= not set
TargetProduct= not set
TargetClass= not set
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=1
GCTMode=0
MessageEndpoint= not set
MessageContent= not set
NeedResponse=0
ResponseEndpoint= not set
Interface=0x00
InquireDevice enabled (default)
Success check disabled
System integration mode disabled
usb_set_debug: Setting debugging level to 15 (on)
usb_os_find_busses: Found 005
usb_os_find_busses: Found 004
usb_os_find_busses: Found 003
usb_os_find_busses: Found 002
usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 005
usb_os_find_devices: Found 001 on 004
usb_os_find_devices: Found 001 on 003
usb_os_find_devices: Found 002 on 002
skipped 1 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 002
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 045 on 001
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
usb_os_find_devices: Found 003 on 001
skipping descriptor 0xB
skipped 1 class/vendor specific endpoint descriptors
skipped 6 class/vendor specific interface descriptors
skipping descriptor 0x25
skipped 1 class/vendor specific endpoint descriptors
skipped 9 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
Looking for default devices ...
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 046d:c510
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0fce:d0e1
found matching vendor ID
found matching product ID
searching devices, found USB ID 0c45:62c0
searching devices, found USB ID 1d6b:0002
Found default devices (1)
Accessing device 045 on bus 001 ...
Not a storage device, skipping SCSI inquiry
USB description data (for identification)
-------------------------
Manufacturer: Sony Ericsson
Product: Sony Ericsson MD400 Mobile Broadband USB Modem
Serial No.: 3578650203595060
-------------------------
Looking for active driver ...
USB error: could not get bound driver: No data available
No driver found. Either detached before or never attached
Trying to send Sony control message
OK, control message sent, waiting for device to return ...
######usb_os_find_busses: Found 005
usb_os_find_busses: Found 004
usb_os_find_busses: Found 003
usb_os_find_busses: Found 002
usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 005
usb_os_find_devices: Found 001 on 004
usb_os_find_devices: Found 001 on 003
usb_os_find_devices: Found 002 on 002
skipped 1 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 002
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 045 on 001
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
usb_os_find_devices: Found 003 on 001
skipping descriptor 0xB
skipped 1 class/vendor specific endpoint descriptors
skipped 6 class/vendor specific interface descriptors
skipping descriptor 0x25
skipped 1 class/vendor specific endpoint descriptors
skipped 9 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 046d:c510
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0fce:d0e1
found matching vendor ID
Segmentation fault
-
Oystein
- Posts: 2
- Joined: 06 Jun 2010, 17:05
Post
by Oystein » 15 Jun 2010, 10:52
Thank you, I'll try to install that tonight.
Cheers
Øystein
|
|
