i can't use Huawei E1690 as modem
Posted: 29 Sep 2009, 16:29
i have Huawei E1690 HSPDA USB Modem. i use Pardus-Linux. i have installed USB_ModeSwitch from its Pisi-package. after installing i have changed the section about Huawei E169 in /etc/usb_modeswitch.conf file like following:
########################################################
Huawei E1690
Contributor: Dale Lane
DefaultVendor= 0x12d1;
DefaultProduct= 0x1446
choose one of these:
DetachStorageOnly=1
HuaweiMode=1
########################################################
# Huawei E180
after that i run usb_modeswitch programm. this are the commands and the results:
and this are lsusb and dmesg (only the section about my device) results
it doesn't switch to modem. i do something wrong, but i don't know what that is.
########################################################
Huawei E1690
Contributor: Dale Lane
DefaultVendor= 0x12d1;
DefaultProduct= 0x1446
choose one of these:
DetachStorageOnly=1
HuaweiMode=1
########################################################
# Huawei E180
after that i run usb_modeswitch programm. this are the commands and the results:
Code: Select all
ferit-pardus etc # usb_modeswitch -v 0x12d1 -p 0x1446 -H
* usb_modeswitch: tool for controlling "flip flop" mode USB devices
* Version 1.0.2 (C) Josua Dietze 2009
* Works with libusb 0.1.12 and probably other versions
Looking for default devices ...
Found default devices (1)
Accessing device 002 on bus 001 ...
Using endpoints 0x01 (out) and 0x81 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
Could not get INQUIRY response (error -16)
Device description data (identification)
-------------------------
Manufacturer: HUAWEI Technology
Product: HUAWEI Mobile
Serial No.: not provided
-------------------------
Sending Huawei control message ...
OK, Huawei control message sent
-> Run lsusb to note any changes. Bye.
ferit-pardus ferit # usb_modeswitch -v 0x12d1 -p 0x1446 -d
* usb_modeswitch: tool for controlling "flip flop" mode USB devices
* Version 1.0.2 (C) Josua Dietze 2009
* Works with libusb 0.1.12 and probably other versions
Looking for default devices ...
Found default devices (1)
Accessing device 002 on bus 001 ...
Using endpoints 0x01 (out) and 0x81 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
Received inquiry data (detailed identification)
-------------------------
Vendor String: HUAWEI
Product String: Mass Storage
Revision String: 2.31
-------------------------
Device description data (identification)
-------------------------
Manufacturer: HUAWEI Technology
Product: HUAWEI Mobile
Serial No.: not provided
-------------------------
Only detaching storage driver for switching ...
Any driver was already detached for inquiry
-> Run lsusb to note any changes. Bye.
Code: Select all
ferit-pardus ferit # lsusb
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 12d1:1446 Huawei Technologies Co., Ltd.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
ferit-pardus ferit # dmesg
[ 371.372146] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 371.498347] usb 1-3: New USB device found, idVendor=12d1, idProduct=1446
[ 371.498360] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 371.498372] usb 1-3: Product: HUAWEI Mobile
[ 371.498379] usb 1-3: Manufacturer: HUAWEI Technology
[ 371.498590] usb 1-3: configuration #1 chosen from 1 choice
[ 372.826813] Initializing USB Mass Storage driver...
[ 372.869248] scsi2 : SCSI emulation for USB Mass Storage devices
[ 372.887403] usb-storage: device found at 2
[ 372.887406] usb-storage: waiting for device to settle before scanning
[ 372.887452] scsi3 : SCSI emulation for USB Mass Storage devices
[ 372.887692] usbcore: registered new interface driver usb-storage
[ 372.887696] USB Mass Storage support registered.
[ 372.910499] usb-storage: device found at 2
[ 372.910503] usb-storage: waiting for device to settle before scanning
[ 373.888379] usb-storage: device scan complete
[ 373.913119] usb-storage: device scan complete
[ 373.915129] scsi 3:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 380.102068] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[ 390.327143] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[ 390.550113] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[ 390.684624] scsi 2:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 390.698588] sr1: scsi-1 drive
[ 390.698712] sr 2:0:0:0: Attached scsi CD-ROM sr1
[ 390.698796] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 390.698962] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 390.712179] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 391.821230] usb 1-3: usbfs: process 985 (modem-modeswitc) did not claim interface 0 before use