Automatic Activation, Hotplug and UDEV, Configuration
Post Reply
kcn
Posts: 1
Joined: 21 May 2018, 11:54

no switching method given. See documentation

Post by kcn » 21 May 2018, 11:57

sudo usb_modeswitch /etc/usb_modeswitch.conf -v 19d2 -p 0016:
Look for default devices ...
product ID matched
Found devices in default mode (1)
Access device 013 on bus 001
Get the current device configuration ...
Current configuration number is 1
Use interface number 0
with class 255

USB description data (for identification)
-------------------------
Manufacturer: ZTE,Incorporated
Product: ZTE WCDMA Technologies MSM
Serial No.: not provided
-------------------------
Warning: no switching method given. See documentation
-> Run lsusb to note any changes. Bye!


This is for ZTE mf70

LOM
Posts: 1380
Joined: 11 Jul 2012, 15:14
Location: Koh Samui, TH

Re: no switching method given. See documentation

Post by LOM » 21 May 2018, 12:21

That was 0 points out of 5 possible and you have obviously not read the documentation for how to use usb_modeswitch..

19d2:0016 is a USB Id after mode switching and can not be further switched.

Josh
Site Admin
Posts: 6570
Joined: 03 Nov 2007, 00:30

Re: no switching method given. See documentation

Post by Josh » 24 May 2018, 11:21

kcn wrote:See documentation
There is the main home page (click "USB_ModeSwitch" on the top nav bar).

There is a man page ("man usb_modeswitch") and there are README files in the source packages.

Don't use "usb_modeswitch.conf" for device-specific parameters.

Post Reply