-
- Posts: 6
- Joined: 25 Feb 2020, 13:14
K4203 switch to modem
Hello, i'm trying to switch to modem mode from network and i don't know how.
Bus 001 Device 021: ID 12d1:1590 Huawei Technologies Co., Ltd.
Bus 001 Device 021: ID 12d1:1590 Huawei Technologies Co., Ltd.
Re: K4203 switch to modem
I don't think there is a modem mode in K4203 but you can try enabling HuaweiAltModeGlobal in /etc/usb_modeswitch.conf and see what that switches the dongle into.
-
- Posts: 6
- Joined: 25 Feb 2020, 13:14
Re: K4203 switch to modem
If there is no modem mode, how can i use it for sending sms's in linux with kannel?
-
- Posts: 6
- Joined: 25 Feb 2020, 13:14
Re: K4203 switch to modem
i get this error msg when i run usb_modeswitch after i changed altmode to 1 in config file:
Code: Select all
sudo usb_modeswitch -v 12d1 -p 1590 --huawei-alt-mode
Look for default devices ...
Found devices in default mode (1)
Access device 002 on bus 001
Get the current device configuration ...
Current configuration number is 1
Use interface number 0
with class 2
Error: can't use storage command in MessageContent with interface 0; interface class is 2, expected 8. Abort[code]
Re: K4203 switch to modem
12d1:1590 is an id the dongle get after switching, you can not switch further on that usb id.
If you want to switch from the cmdline then disable automatic switching by usb_modeswitch or whatever other program that has switched it into 12d1:1590.
If you want to switch from the cmdline then disable automatic switching by usb_modeswitch or whatever other program that has switched it into 12d1:1590.
-
- Posts: 6
- Joined: 25 Feb 2020, 13:14
Re: K4203 switch to modem
i disabled it and it switched to 12d1:1f1c but still not sending sms.
Re: K4203 switch to modem
No it didn't switch, 12d1:1f1c is the initial id before the dongle is switched.doorcollider wrote: ↑26 Feb 2020, 11:00 i disabled it and it switched to 12d1:1f1c but still not sending sms.
You can now use that id on the cmdline and the alt-mode switch and see what you get after it switched.
-
- Posts: 6
- Joined: 25 Feb 2020, 13:14
Re: K4203 switch to modem
it worked <3. Thnx alot!
-
- Posts: 6
- Joined: 25 Feb 2020, 13:14
Re: K4203 switch to modem
How can i reverse to original value after huawei-alt-mode?
Re: K4203 switch to modem
There is no "going back" after the initial mode switch. You have to re-plug the device.