Hi, I'm using rooted HTC desire 700 and a ZTE AC8700 cdma/evdo modem with BSNL prepaid plan. My modem got detected by PPP widget 2 and I configured the profile. When I click on connect, it says "Dialing out..." and then "No Modem Response" message comes up.
PPP.log
06-May-2016 12:14:36 PM
Start chat sequence for dialling ...
>
ATE0
<
OK
>
AT+CFUN?
<
ERROR
>
ATD#777
Timeout while waiting for modem reply
====
End of modem init sequence
PPP Widget 2 No Modem Response
Last edited by krish99 on 06 May 2016, 08:57, edited 2 times in total.
Re: PPP Widget 2 Stuck up at "Building Network..."
It would help to see both the "USB Log" and the "PPP Log".
Enable logging in the configuration (option at the bottom). Re-plug the modem and start the connection when ready. Hit "Disconnect" after waiting around around half a minute, and open the configuration again.
Now the log display buttons should be active. Open the logs and copy the content in your reply. No screenshot please, just text!
Enable logging in the configuration (option at the bottom). Re-plug the modem and start the connection when ready. Hit "Disconnect" after waiting around around half a minute, and open the configuration again.
Now the log display buttons should be active. Open the logs and copy the content in your reply. No screenshot please, just text!