[d_ralh]

Just some feedback. .. the widget works on the xoom...I needed to use cyanogenmod rom. .. that properly supports the widget.... only niggle is that instead of switching the wifi on it should create a simulation 3g signal I.e. "2g/E/3g/H" signs. That would be cool. If not then atleast restore wifi status to what it was previously.... I.e. on or off. I have wifi usually off and plugging in the dongle turns it on but taking it out doesnt switch it back off

[saltiveri]

Finally GT-P3110_3.0.31 driver worked for me.

I have a GT-5110 tablet with Android 4.1.1 kernel 3.0.31-523998 and a ZTE MF190 3G usb modem.

You are a crack! Thank you very much!

[astromedia]

Im not sure if i know enought ... i could say only this - diod seems to corectly blinking like device is prepairing ... anyway it seems there is enought power ... this device could recharge another mobile device via usb otg

So, is there something what could i do? or i have to wait until u figure out how solve this problem?

[kirilliussa]

Good day!Problem with drivers for huawei e 1550 on Motorola Xoom I decided by new version of Android (cyanogenmod 4.2.1).All the Best

[rayaz]

Could I get a driver for my version please?

Samsung Galaxy S3 (GT-I9300)
Android Version: 4.1.1
Baseband Version: I9300XXDLID
Kernel Version: 3.0.31-368423 se.infra@SEP-78#1 SMP PREEMPT Fri Oct 19 18:17:48 KST 2012
Build Number: JRO03C.I9300XXDLJ4

My Device ZTE AC 2726
Id: 19d2:fff1

Regards

[syed]

I got Samsung tab 2 gt -3113, when I connect the dongle with it, it says couldn't. Connect.high powdered USB device.is there any solution for this_regards.

[Josh]

Please read the FAQ regarding power issues here (see bottom):

http://www.draisberghof.de/android/pppwidget.html

[bhuvan]

Hey, I have a Samsung GT-P3100. As instructed i have downloaded the drivers and installed in the lib folder of pppwidget.
I am currently running JellyBean OS. My Kernel version is 3.0.31-471788.

When I connect my Datastick(ZTE AC2737) i still get an error message "NO DRIVER FOUND". Here is the USB log file






USB_ModeSwitch log from Thu Jan 24 20:20:18 IST 2013

Raw args from udev: 1-1/1-1:1.0

Using top device dir /sys/bus/usb/devices/1-1
----------------
USB values from sysfs:
manufacturer ZTE, Incorporated
product USB Storage
serial 000000000002
----------------
bNumConfigurations is 1 - don't check for active configuration
SCSI attributes not needed, moving on
checking config: /data/data/de.draisberghof.pppwidget/app_tmp/19d2.fff5
! matched. Reading config data
devList 1:
config: TargetVendor set to 19d2
config: TargetProductList set to fff1,fffe,ffff
Driver module is "option", ID path is /sys/bus/usb-serial/drivers/option1

Command to be run:
usb_modeswitch -I -W -D -s 20 -u -1 -b 1 -g 12 -v 19d2 -p fff5 -f $cB

Verbose debug output of usb_modeswitch and libusb follows
(Note that some USB errors are to be expected in the process)
--------------------------------

Reading long config from command line

* usb_modeswitch: handle USB devices with multiple modes
* Version 1.2.4 (C) Josua Dietze 2012
* Based on libusb0 (0.1.12 and above)

! PLEASE REPORT NEW CONFIGURATIONS !

DefaultVendor= 0x19d2
DefaultProduct= 0xfff5
TargetVendor= 0x19d2
TargetProduct= not set
TargetClass= not set
TargetProductList="fff1,fffe,ffff"

DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
QisdaMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint= not set
MessageContent="5553424312345678c00000008000069f030000000000000000000000000000"
NeedResponse=0
ResponseEndpoint= not set

InquireDevice disabled
Success check enabled, max. wait time 20 seconds
System integration mode enabled

Use given bus/device number: 001/012 ...
Looking for default devices ...
bus/device number matched
searching devices, found USB ID 19d2:fff5
found matching vendor ID
found matching product ID
adding device
Found device in default mode, class or configuration (1)
Skipping the check for the current configuration
Using interface number 0
Using endpoints 0x0a (out) and 0x89 (in)

USB description data (for identification)
-------------------------
Manufacturer: ZTE, Incorporated
Product: USB Storage
Serial No.: 000000000002
-------------------------
Looking for active driver ...
OK, driver found; name unknown, limitation of libusb1
OK, driver "unkown" detached
Setting up communication with interface 0
Using endpoint 0x0a for message sending ...
Trying to send message 1 to endpoint 0x0a ...
OK, message successfully sent
Resetting response endpoint 0x89
Resetting message endpoint 0x0a
Device is gone, skipping any further commands
Bus/dev search active, referring success check to wrapper. Bye.

ok:busdev
--------------------------------
(end of usb_modeswitch output)

Checking success of mode switch for max. 20 seconds ...
Waiting for device file system (1 sec.) ...
Reading attributes ...
Mode switch has completed
Mode switching was successful, found 19d2:fff1 (ZTE, Incorporated: ZTE CDMA Tech)
Device class of first interface is ff
Now checking for bound driver ...
No driver has bound to interface 0 yet
Module loader is /system/bin/insmod
Trying to find and install main driver module "option"

Trying to find module "option"
Loading support module /sdcard/pppwidget/lib/ppp_async.ko
Error: insmod: init_module '/sdcard/pppwidget/lib/ppp_async.ko' failed (Exec format error)
Loading support module /sdcard/pppwidget/lib/usb_wwan.ko
Error: insmod: init_module '/sdcard/pppwidget/lib/usb_wwan.ko' failed (Exec format error)
Loading main driver module "option"
Error: insmod: init_module '/sdcard/pppwidget/lib/option.ko' failed (Exec format error)
Falling back to "usbserial"
Module "usb_serial" not found, can't do more here
Driver binding did not work for this device

All done, exiting


Please suggest what to do.

[Josh]

As pointed out before, we don't have the correct configuration for the GT-P3100 yet. It's Samsung's turn now.

[rayaz]

Hi,

May I keep up my hopes?

Regards

Rayaz

[Josh]

There has been movement at Samsung's, but the verdict is not out yet:

http://www.draisberghof.de/usb_modeswit ... 8405#p8405

[Josh]

Good news:

We found (rather by accident) a configuration that's working on the JB (4.1.1) version of the GT-P3100. See top post.

If you can, try this on the GT-P5100 also.

[rayaz]

Could I get a driver for my version please?

Samsung Galaxy S3 (GT-I9300)
Android Version: 4.1.1
Baseband Version: I9300XXDLID
Kernel Version: 3.0.31-368423 se.infra@SEP-78#1 SMP PREEMPT Fri Oct 19 18:17:48 KST 2012
Build Number: JRO03C.I9300XXDLJ4

My Device ZTE AC 2726
Id: 19d2:fff1

Regards

Any news ?

Regards

[MarioLast]

Phone LenovoP770
Modem Pantech JM175VW

Driver not found

What to do?

[Josh]

MarioLast, we need the source code for the P770. Did they release it yet?